Displays

 

METROWALL

  • CB1_PLUS

    Optional element of CB1-4 A and CB1A-ANGOLO: Wooden display with sliding wheels to arrange loose big- sized tiles – max thickness 14 mm. Left version and right version
  • CB1-6

    Slanting basis made of lacquered wood with 6 millings to arrange loose tiles – max thickness 12 mm.
  • CB3-6

    Basis in lacquered wood with 6 millings to arrange loose tiles – max
  • CB-10

    Basis in lacquered wood with 10 millings to arrange loose tiles thickness from 5 to 13 mm max. Right or left.
  • CB6-6

    Basis in lacquered wood with 6 millings, 3 different depths, for loose tiles – thickness from 6 to 19 mm.
  • CB1-4A

    Slanting basis in lacquered wood with 4 millings to arrange loose tiles – thickness from 4 to 14 mm max.
  • CB1A_ANGOLO

    Corner wooden basis with 8 millings to arrange loose tiles – thickness from 4 to 14 mm max.
  • CB1-TERM

    Right ending side in lacquered wood for CB1-4A e CB1A-ANGOLO. Left ending side in lacquered wood for CB1-4A e CB1A-ANGOLO.
  • LB1-7

    Lacquered wooden flat with 7 millings to arrange wooden listels.
  • CP-13

    Suspended shelf to arrange loose tiles 10x10cm
  • CB4-6-50 / CB4-6-100

    Slanting basis made of lacquered wood with 6 millings to arrange loose tiles max thickness 12 mm. Available 50 cm and 100 cm version.
  • CB5-6

    Adjustable slanting rack made of lacquered wood to arrange 6 tiles min 30×30 max 120×60 cm. Max thickness 12 mm.
  • CP1-10S

    Lacquered wooden shelf with 10 oblique millings for loose tiles max depth 35 cm.- max thickness 12 mm.
  • CP3-15 / CP3-TAV-15

    Lacquered wooden shelf with 15 oblique millings for loose tiles max
  • CP2-6S

    Lacquered wooden shelf with 6 horizontal millings for loose tiles. Max thickness 12 mm.
  • CP14-12

    Lacquered wooden shelf with 12 oblique millings for loose tiles max thickness 5 mm. Right version and left
  • CP17-16

    Accessory for SINGLE STAVE: Lacquered wooden shelf with 16 oblique millings for loose tiles max thickness 5 mm. Right version and left version.
  • CP4-8-50 / CP4-8-60

    Slanting shelf made of lacquered wood with 8 millings for loose tiles. Max thickness 13 mm. Max width 50/60 cm.
  • CP5-4 / CP5-4 PLUS

    Painted metal support to arrange 4 loose tiles max 60×60 cm. Max thickness 12 mm. Also available the PLUS version for tiles max thickness 14 mm.
  • CP6-S

    Painted metal flat bracket for loose tiles.
  • CP7-C-50 / CP7-C-100

    Painted metal bracket for loose tiles. Available 50 / 100 cm wide.
  • CP-60 / CP-100

    Metal shelf for loose tiles, catalogs or pictures. Available 60/100 cm versions
  • CP8-REG

    Adjustable painted metal support for loose tiles min 50×50, max
  • CP-BIG

    Metal support to arrange big-sized tiles – max thickness 6 mm. Adjustable depth of the lower part to adjust the inclination of the tiles.
  • CP-BOOK

    Metal element complete with 12 supports to arrange 24 boards 33x33cm thickness 5 mm.
  • CP10

    Single painted metal support for loose tiles min 30×30 cm max 60×60 cm to be hanged directly to the staved wall.
  • CP9-7

    Painted metal display with 7 adjustable inclined supports for loose tiles min 30×30 max 60×60 cm.
  • CP16-9

    Metal painted display with 9 adjustable and inclined supports for loose tiles min 30×30, max 60×60 cm – max thickness 14 mm. Metal sheet support.
  • MP1

    Lacquered wooden shelf for mosaic panels and catalogs.
  • MP3-12

    Painted metal display with 12 metal waves.
  • MP2-16 / MP2-TAV-16

    Lacquered wooden shelf with 16 oblique millings for loose tiles max depth 17 cm. Max thickness 12 mm. Also available as table display.
  • MP4

    Metal wave 30×30 cm for mosaics to be hanged directed to the staved wall.
  • MP5

    Horizontal painted metal support to hang 7 MDF boards (not included).
  • MP6-7

    Slanting painted metal support to hang 7 MDF boards (not included).
  • MP8

    MDF painted board to be sampled.
  • MP9 / S5-GR

    Painted metal support to hang max 6 metal painted hungers (S5-GR not included). S5-GR: Metal hanger to arrange 1 panel 100x30x0,5 cm and 1 panel 100x60x1,2 cm.
  • MP10-15

    Mosaic case made of lacquered wood to arrange MDF boards 35,4×35,4×0,5 cm or tiles max. thickness 12 mm.
  • MP-SMALL

    Metal support to arrange decoration tiles 10x10cm.
  • C-FLAT

    Basis with panel to be sampled.
  • C-WALL

    Panel to be sampled complete with assembly kit and cover profile.
  • S-TERM

    Ending element for staved wall solution “E” to arrange boards of different sizes, with adjustable shelves. With millings for max. thickness 12 mm.
  • NP1

    Metal support for graphic panel (not included).
  • NP2-50 / NP2-100

    Flat shelf with internal LED lighting, plexiglass plan and metal profile.
  • NP3-50 / NP3-100

    Flat shelf with wooden plan and metal profile to arrange bathroom accessories (width 50 / 100 cm).
  • NP4-50 / NP4-100

    Slanting shelf with wooden plan and metal profile to arrange bathroom accessories width 50 / 100 cm.
  • NP5

    A4 / A5 sized plexiglass case to arrange catalogues.
  • NP6

    Lacquered wooden shelf to arrange catalogues.
  • NP7

    Ending display for staved wall solutions “E” to arrange catalogue.
  • NB2

    “L” table made of lacquered wood to be hanged to the staved wall.
  • NB-LUCE

    Lighting spot.
  • S-ANGOLO

    Open shelves in lacquered wood to arrange catalogues.
  • NB3-PLUS

    “L” table made of lacquered wood to be hanged to the staved wall complete with doors and open cases.